The WAP G is an in-wall mount WiFi access point that can be fitted into a standard UK fit-back box. It features dual Gb Ethernet ports so is ideal for super-fast broadband systems and has a throughput bandwidth capacity of 1200Mpbs meaning it will out-perform any other wallplate access point in its class!
With a minimal screwless front panel with a discrete operational LED and reset button hidden behind a cover, the WAP G is perfect for a neat minimal installation.
Features
- Gigabit in-wall access point
- Dual band
- 1200Mbps through data
- 48V PoE
- Dual Gb Ethernet ports
- Single gang UK wall box mount
- Simple on-board programming software compatible with smart devices
- Screwless cover
Technical Specifications
- Hardware Specifications:
- Chipset: MT7621DAT+MT7613B+MT7603E
- DDR:128MB
- Flash: 16MB
- Antenna: 2x 2dBi Internal Antennas
- Wireless Standard: IEEE802.11b/g/n/ac
- RF Parameters:
- Output Power (Max): 200mW(23dBm)
- Receiving Sensitivity (Max): -96dBm
- Working Frequency:
- 2.4GHz-2.472GHz
- 5.180GHz-5.825GHz
- Modulation Mode:
- DSSS: DBPSK@1Mbps. DQPSK@2Mbps. CCK@5.5/11Mbps
- OFDM: BPSK@6/9Mbps. QPSK@12/18Mbps. 16-QAM@24Mbps, 64-QAM@48/54Mbps
- 11n: MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM
- 11ac: MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM, 256QAM
- Wireless Rate: 2.4GHz 300Mbps; 5.8GHz 867Mbps
- Physical Ports:
- 1x 10/100/1000Mbps WAN Blue RJ45 Port, Support 48V POE
- 1x 10/100/1000Mbps LAN Grey RJ45 Port
- Indicator: WiFi Indicator, LED Light
- Power Supply:
- Power Supply: 802.3af802.3at POE Power Supply(0-100m)
- Power Adapter: 48V 0.32A PoE Power Adapter (available seperately)
- Power Consumption: <12W
- IP Index: IP41 rating
- MTBF: >250000H
- Installation Way: In Wall Installation
- Case: Plastic Case (Imported ABS Material)
- Physical Features:
- Working Environment:
- Working Temperature: -10°C~55°C
- Storage Temperature: -40°C~70°C
- Operation Humidity: 10%~90% RH Non-condensing
- Storage Humidity: 5%~90% RH Non-condensing
01242 511511
